Strength at its core
A one-piece body without welds. Double reduction limits stress and noise, protecting blades and moving parts.
C series · 100% Made in Italy
Mechanical cutting machines
Mechanical rebar cutting machines in six models, from C34 to C74. A monobloc ductile-iron body and double reduction support continuous site work. Compare cutting capacities by diameter, steel strength and number of bars.
Request informationC34C38C44C54C56C74Models
Ø 64 mmMaximum cutting capacityC74 · 1 bar · 65 kg/mm²
Ø 54 mmMaximum cutting capacityC74 · 1 bar · 85 kg/mm²
Maximum capacities across the range. See the tables for each model’s values.
Compare technical data
1 / 5
Inside the machine
The right cut, every day
Straightforward maintenance
Simplified lubrication, screw adjustment and service tools for maintenance operations.
A machine for your work
Components inspected during production, with configurations that can be customised with the TORO team.
Choose your configuration
Models and specifications
| Model | Power supply | Motor (kW) | Dimensions (cm) | Weight (kg) |
|---|---|---|---|---|
| C34 | 1ph / 3ph | 2.2 | 82 × 50 × 68 | 235 |
| C38 | 1ph / 3ph | 3 | 85 × 75 × 72 | 245 |
| C44 | 1ph / 3ph | 3 | 98 × 56 × 77 | 405 |
| C54 | 3ph | 4 | 117 × 65 × 87 | 630 |
| C56 | 3ph | 5.5 | 117 × 65 × 92 | 640 |
| C74 | 3ph | 7.5 | 152 × 85 × 110 | 1,280 |
Cutting capacity
Diameters in mm, according to steel strength and the number of bars processed together.
On smaller screens, scroll the table sideways to compare all values.
| Model | Steel strength: 65 kg/mm² | Steel strength: 85 kg/mm² | ||||
|---|---|---|---|---|---|---|
| 1 bar | 2 bars | 3 bars | 1 bar | 2 bars | 3 bars | |
| C34 | Ø 28 | Ø 20 | Ø 16 | Ø 26 | Ø 18 | Ø 14 |
| C38 | Ø 30 | Ø 22 | Ø 18 | Ø 28 | Ø 20 | Ø 16 |
| C44 | Ø 34 | Ø 28 | Ø 18 | Ø 32 | Ø 22 | Ø 18 |
| C54 | Ø 46 | Ø 32 | Ø 24 | Ø 40 | Ø 30 | Ø 22 |
| C56 | Ø 48 | Ø 34 | Ø 26 | Ø 42 | Ø 32 | Ø 24 |
| C74 | Ø 64 | Ø 44 | Ø 36 | Ø 54 | Ø 36 | Ø 30 |
Metric values from the original TORO table. Always confirm capacity and configuration with the manufacturer.
Included with the machine
Standard equipment
Components, tools and controls supplied with your TORO. Differences between CE and non-CE versions are shown below.
Standard equipment
Two blades, four cutting edges
Two forged silicon-steel blades, each with four usable cutting edges.
Standard equipment
Three-point lubrication
Three easily accessible greasing points. The manual grease pump is an extra accessory, not part of the standard equipment.
Standard equipment
Screw-adjustable checking block
Aligns the reinforcing bar in the cutting area through screw adjustment.
Standard on CE · Optional on non-CE
Phase monitoring relay
Three-phase versions only: monitors phase presence and sequence. Standard on CE machines, optional on non-CE versions.
Complete your workstation
Accessories
For your machine
OptionalCuttingStand and foot pedal
Dedicated cutting-machine stand with a control foot pedal. An optional solution for organising the cutting workstation, available for all C-series models.
For:Cutting machines
Details and compatibility
Maintenance · ExtraCuttingCircuit breaker guard
A guard for the thermal-magnetic circuit breaker, reducing the risk of accidental damage on site.
For:Cutting machines
Details and compatibilityStandard on CE · Optional on non-CEElectrical controlPhase monitoring relay
Three-phase versions only: monitors phase presence and sequence. Standard on CE machines, optional on non-CE versions.
For:Cutting machinesBending machinesCombined machinesStirrup bending machines
Details and compatibility
OptionalCuttingBar guide
Guides bars from the roller bench to the cutting area. Improves handling continuity and offers protection for the operator’s lower body.
For:Cutting machines
Details and compatibility
OptionalWorkstationModular roller workbench
A storage surface and roller bed for rebar handling. An extendable 2-metre base module, adjustable feet and a dismantlable frame. For all TORO machines.
For:Cutting machinesBending machinesCombined machinesStirrup bending machinesSpiral machines
Details and compatibility
Maintenance · ExtraProtectionMachine cover
Cover for all TORO models: cutting, bending, combined, stirrup and spiral machines. Protects the machine when not in use, with dimensions matched to the model.
For:Cutting machinesBending machinesCombined machinesStirrup bending machinesSpiral machines
Details and compatibility
Maintenance · ExtraMachine configurationGrease pump
Manual pump for maintaining cutting-machine lubrication points. This is an extra: greasing points are standard, while the pump is ordered separately.
For:Cutting machines
Details and compatibility
Maintenance · ExtraMachine configurationOriginal spare-parts kits · Cutting machines
Original kits listed for C34, C38, C44, C54 and C56. The C74 datasheet does not specify a kit: enquire about availability and contents, quoting the serial number.
For:Cutting machines
Details and compatibilityConfirm compatibility and power supply for your specific model.